Home     |    Our Location      |     Before & After Photos      |      Our Equipment      |      Links     |      Contact Us    
Our Equipment

"We pride ourselves in using the top of the line equipment."

Our Full Down Draft Booth:

Full down draft booths are considered to be top of the line in paint booth configurations. Intake air is pre-filtered in the air-make up unit and then enters the booth through the ceiling filters. We use Filtrair® diffusion filters that stop particles down to 5 microns. They also produce a uniform air flow though out the booth.  Positive booth pressure can also be maintained to keep contaminates out of the booth resulting in a cleaner paint job. Our down draft booth also provides for a cleaner work environment for the painter. Booth maintenance is also very important to a clean paint job. We keep a regular filter change out schedule and keep booth walls and floor clean.

 

 

 

3M Sun Gun Color Matching Light:

The 3M Sun Gun Color Matching Light guides you through the entire refinishing process. Identify pre-paint defects such as pin holes, swirls, and sand-scratches. Such imperfections are invisible in regular light. Verify color matches using spray-outs or variants. Check for full paint coverage and post-paint imperfections before applying clear coat.

 

 

 

Acquire Plus EFX®
 

Acquire Plus EFX is an advanced, hand-held spectrophotometer designed to  help you achieve the most accurate color match possible—even for complicated metallic pearl and effect colors—faster and easier than ever before.

 

 

 

 

ColorNet® is a user-friendly, software platform designed specifically to make color formula retrieval and reporting quick and easy. It utilizes technology to enhance our extensive color expertise and provides features such as Color Proofing, Chromovision®, VINdicator™, cost and VOC tracking, inventory management and a variety of reports.

 

 

Color proofing with ColorNet®

We capture a sample of the vehicle paint by using a ChromaVision camera. The samples of each are matched by a side-by-side comparision on the computer.

With advanced tools within the software program we are able to view blending options to get the most accurate mixing of any paint in the market.

 

i4 | Inverter Resistance Spot Welder

 

 

 

Pro Spot  i4  Inverter Resistance Spot Welder

The i4 Inverter Resistance Spot Welder is designed to handle the difficult to weld materials such as boron steels and Advanced High Strength Steels (AHSS). These new metals are rapidly becoming the material of choice among car manufacturers. The i4 includes an OEM programmable feature with detailed repair illustrations and customized weld programs.

 

Pro Spot Smart Mig Welder

The SP-2 Smart MIG has two MIG torches that can be setup for two different base metals: Aluminum and Silicon Bronze or Steel. The shielding gas and weld program with the appropriate synergic curve automatically switch when pulling the trigger. The SP-2 is ideal for body shops welding stainless steel and aluminum. In synergic mode, the microprocessor controls optimal arc stability and weld quality. Welding can be done in continuous or pulse mode. Maximum power output of 200 A.

 

 

SP-2 | Smart MIG

 

 

 

 

 

 

 
Duz Mor 360 Frame Machine
  • Exclusive 3-dimensional pulling 
  • Patented 10 position vertical lift. from 7in to 35in above floor 
  • Easy floor-level loading 
  • Full under-car access 
  • 10 ton electric hydraulic pump 
  • 8 way adjustable unibody anchors 
  • Drive-over anchor bases with easy slide out anchors 
  • Unlimited down pulls (center opening or on bed surface) 
  • 8 ft interior height 
  • 3 repositionable towers 
  • Easyglide steel to steel wheel mounted towers (no binding) 
  • 26 pull height positions (8ft tower)
  • 1/2in pull chains

 

 

 

Eclipse Measuring System

Advanced Measurement Systems is the leading innovator in the collision repair industry, specializing in computerized laser measurement systems. We provide customers with the latest in aerospace based Laser Technology.  AMS introduces the first measurement system that certifies measurement accuracy. Our products enhance shop efficiency providing the best return on your measurement expenditure.

 

AL-5 | Aluminum Dent Pulling System

 

Aluminum Repair Equipment

Pro Spot AL-5 Capacitor Discharge Stud Welder is designed for aluminum dent pulling and can also be used with steel studs for welding to UHSS panels with no or very little heat applied to the panels. The welder is very easy to use and is controlled by one knob to adjust weld power. The welder auto detects the line voltage between 110 VAC - 240 VAC.

"BIG OR SMALL, WE TOW THEM ALL!"

 

 

 

 

 

 

 

 

 

 

 

PH: 563-539-2056

2017 Joe's Auto Body  All rights reserved.